Filter
Top Products
21
RS-232 COMMANDS
#FADEFAULT Function
The #FADEFAULT function will reset the Switcher to the default routing settings.
Syntax:
#fadefault
Parameters:
None
#IRRMTADD Command
The #IRRMTADD sets the IR channel. The IR channel for the Switcher and the
IR Remote Control Unit must be the same.
Syntax:
#irrmtadd param1
Parameters:
param1 State [0 - 3]
Value Meaning
0 IR channel 0
1 IR channel 1
2 IR channel 2
3 IR channel 3