Filter
Top Products
10
OUTPUT SIGNAL CONFIGURATION
Dip Switches
HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL
There is a bank of 2 dip switches on the underside of the DVI to RGBS with
Scaler unit that controls which type of signal is output. Please remove the
metallic tape on the underside of the unit to reveal this bank of switches. Use the
guidelines below to output your desired signal type.
Switch 1 Switch 2 Output Signal Type
OFF OFF R/G/B/S 5V Sync
OFF ON R/Gs/B/Gs Default
ON OFF R/G/B/S 0.3V Sync
ON ON Y/Pb/Pr/Y Component