Filter
Top Products
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI TO RGBS WITH SCALER
• Output signal types are not confi gured through the on-screen GUI. To
confi gure the output signal type of the DVI to RGBS with Scaler use the DIP
switches located on the underside of the unit. Please see page 10 for output
signal types and confi guration options.
• The DVI port is a DVI-I type input port and will accept either a DVI-D (digital),
DVI-A (analog) type signal.
• This device is DVI 1.0 compliant.
• This device will not pass a DVI signal that contains HDCP.
OPERATION NOTES
2