Filter
Top Products
29
RS-232 SERIAL CONTROL
Commands
Command Description
R Routing command
S Routes a single input to all outputs
M Returns the current routing status of matrix
F Toggle 5V fi ber optic extender feature
R Command
The R command allows specifi c routing of inputs and outputs.
Syntax:
r param1 param2
Parameters:
param1 DVI Ouput [1 - 8]
param2 DVI Input [1 - 8]
S Command
The S command routes a single input to all 8 DVI outputs.
Syntax:
s param1
Parameters:
param1 Input [1 - 8]
Notes:
Setting param1 to a value of 0 will place the matrix in one-to-one mode. This
means that Input1 will be routed to Output1, Input2 will be routed to Output2, and
so on.