Filter
Top Products
- 46 -
GA-K8NS Pro Motherboard
English
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
Soft-Off by PWR-BTTN [Instant-Off]
PME Event Wake Up [Disabled]
Modem Ring On [Disabled]
S3 Resume by USB device [Disabled]
Resume by Alarm [Disabled]
x Day of Month Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Power On by Mouse [Disabled]
Power On by Keyboard [Disabled]
x KB Power ON Password Enter
AC BACK Function [Soft-Off]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Default F7: Optimized Defaults
Item Help
Menu Level`
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM).
Soft-Off by PWR-BTTN
Instant-off Press power button then power off instantly. (Default value)
Delay 4 Sec. Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled Disable this function. (Default value)
Enabled Enable PME as wake up event.
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled Disable Modem Ring on function. (Default value)
Enabled Enable Modem Ring on function.
S3 Resume by USB device
Disabled Disable this function. (Default value)
Enable Enable USB device wake up system from S3 suspend type.
Resume by Alarm
You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
Power Management Setup