Filter
Top Products
GN-B41G Wireless Broadband Router
Chapter 2 Quick Installation
Your Gigabyte GN-B41G Wireless Broadband Router has a built-in software
application called Smart Setup II that will auto-configure your router for Internet
access.
1. Please refer to diagram above to connect your router to your network.
2. Power on your computer and launch either Internet Explorer or Netscape
Navigator.
3. Based on your Internet service, you may be required to enter your ISP
account’s username and password or other additional information as
prompted. See below for screenshots.
Dynamic IP Address If you use a dynamic IP address, you can directly
connect to Internet without extra configuration.
PPPoE If you use a PPPoE connection, please enter your
ISP user ID and password.
9