Filter
Top Products
Februaray-2006 Page 39 / 42 MasterVoIP VoIP to GSM Gateway
3.4.5 Port and SIM Settings
This chapter details port to SIM association as well as required and optional settings.
3.4.5.1 Dial Settings for the GSM Port
After defining the Comport, press
GSM Port
in the left pane. The Port Setting window is displayed.
Define dial settings in this window as follows:
1. In the Dial pause box, set the
time interval
, whereupon a
dialed number is dispatched
after the designated
delay time. Each unit is 0.1 second. For example, if you want the number to be dispatched 3 seconds after you
finish dialing, enter 30 in this box.
2. Upon completion of a call, if you want to remain connected to the
GSM Network
, set
Repeat Access
to
VoIP
to On
.
3. Set
Receiving (Rx)
and transmitting volumes in the Rx (receiving) and
Transmitting (Tx)
volume
settings.
4. Press
Write Settings.