Filter
Top Products
Februaray-2006 Page 5 / 42 MasterVoIP VoIP to GSM Gateway
1 Getting Started
Eurotech Communication
team is glad you have chosen to use the
Eurotech’s VoIPMaster
GSM to VoIP gateway
for greatly saving your call costs. We will do our best to make your installation efforts as well as day-to-day
configuration and monitoring tasks be pleasant tasks as possible. We wish you a smooth operation while greatly saving
your office mobile phone calls.
This chapter is your “
Map for installation, configuration and monitoring tasks”
and includes a short explanation
on each stage as well as references for more elaborated explanations, drawings and examples in other chapters. The
following is a list of tasks you shall perform, where you shall go over it sequentially or skip tasks that are optional and
not required for your current needs. It is advised that you will use the following tasks as
your
Do To List
.
As a start
Check your package Items
at Chapter 2 “
Check your package Items”.
Later proceed with the
Gradstream HanyTone 286 VoIP Client ATA (Analog to Telephone Adaptor)
which
resides in the VoIPMaster gateway and enables a Web based configuration interface.
The VoIP Client ATA provides VoIP call origination and termination with PSTN network, with some add-on
supplementary services which are reviewed at Chapter 3.
The
VoIPMaster gateway
adds new capabilities of GSM to VoIP calls origination and termination to the client ATA.
The following topics of the VoIP Client ATA are reviewed in Chapter 3:
Client ATA Product Overview, Key Features, Hardware Specification
and
Basic Operations
as follows
:
Getting Familiar with the Key Pad and the Voice Prompt
Placing Phone Calls
Calling phone or extension numbers
Direct IP calls
Blind Transfer
Attended Transfer
Call Features
Fax Support
LED Light Pattern Indication
Now you shall start configure the
VoIP Client ATA
following the
Configuration Guide
at chapter 3.2.
The following configuration actions shall be performed with several guidelines for optional actions:
Configuring VOIP Client with a Web Browser
Access the Web Configuration Menu
End User Configuration
Advanced User Configuration
Saving the Configuration Changes
Remotely rebooting VoIP Client ATA
Restoring the Factory Default Settings
After you have completed the
VoIP Client ATA
you can start configuring the
VoIP Master,
starting with learning
the VoIPMaster concept rule in the network and the way it works at “
What is the VoIP Master and how it works
”
chapter.