Hasselblad Flextight 646 Power Supply User Manual


 
Mounting/Dismounting of the Cabinet
To dismount the cabinet (A) remove the two screws (B) at the scanner
back using a 2.5 mm allen key, then pull the cabinet upwards.
When mounting the cabinet, make sure that it catches the bends (C) in
both sides, then lower it slowly while making sure that it goes free of all
cables and extrusions and finally tighten the screws (B).
User's Guide - Flextight 646
Hardware Reference - Flextight 646
15
Setting up the Scanner
English
B
A
C
Figure 5: Mounting/Dismounting of the Cabinet