Hasselblad Flextight 646 Power Supply User Manual


 
Warnings and Restrictions
Read all of the included documentation before attempting to install
and use the scanner.
Do not touch the originals and/or the original holder while scanning.
Do not start scanning or previewing until an original holder with an
original has been mounted.
The original holder is only to be mounted or removed when the drum
is in the load position.
When you turn on the scanner, the drum will roll to the load position,
if it is not there already. Do not touch the scanner while the drum is
rotating.
Do not place your fingers or any other object into the scanner while it
is connected to power.
Before servicing or opening the scanner, the power supply must be
disconnected from the mains (unplugged). It is not sufficient simply to
press the on/off button.
Install the scanner in a location where children can not get to it. It
contains small openings and moving parts that can cause injury.
User's Guide - Flextight 646
Hardware Reference - Flextight 646
6
Warnings and Restrictions
English