Filter
Top Products
4
INSTALLATION
The Beacon II Smart Controller should be installed in a location where the large Liquid
Crystal Display (LCD) can be viewed easily, yet is secure and vibration free. Because of the
LCD screen, the Beacon II Smart Controller should not be mounted where it will experience
temperatures below 40°F or above 100°F.
A terminal strip for wiring connections is located on the base of the Beacon II Smart
Controller. To access this terminal strip, pull both halves of the Beacon II Smart
Controller housing apart. Mounting holes are located in the plastic base.
Beacon II Smart Controller Base
24 V Terminal
Strip
RS232
Connector
Installation