Filter
Top Products
Navigation
33HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Control panel operations
The following operations can be performed from the jukebox control panel:
■ Ejecting a disk, page 33
■ Entering the administration menu password, page 34
■ Changing the administration menu password, page 35
■ Viewing the current SCSI IDs, page 36
■ Configuring the jukebox, page 37
■ Setting an operating configuration, page 39
■ Retrieving log history, page 40
■ Running an internal test, page 44
Note: For information on loading a disk, see “Loading a disk into the drive” on
page 21.
Ejecting a disk
Note: Some application software packages require that you load and eject disks by
following the instructions in the software. If you use application software to manage
files in the jukebox, check the software documentation before proceeding with these
steps.
1. With READY displaying on the control panel, press NEXT until EJECT *
displays, and then press ENTER.
2. EJECT SLOT # displays, with the “#” flashing to indicate the first storage
slot in the jukebox that contains a disk.
■ To select the storage slot number that shows in the display, press
ENTER.
■ To choose a different storage slot, press NEXT or PREV until the desired
slot number displays, and then press ENTER.
EJECTING displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.