● The graphic settings in the printer properties might not be correct for the type of job that
you are printing. Try a different graphic setting in the printer properties. See
Printer
properties (driver) for more information.
● Clean the printer, particularly the contacts between the print cartridge and the power
supply.
Page format is different than on another printer
If you used an older or different printer driver (printer software) to create the document or the
printer properties settings in the software are different, the page format might change when
you try to print using your new printer driver or settings. To help eliminate this problem, try
the following:
● Create documents and print them using the same printer driver (printer software) and
printer properties settings regardless of which HP LaserJet printer you use to print them.
● Change the resolution, paper size, font settings, and other settings. See
Printer
properties (driver) for more information.
● For the HP LaserJet 1022n and 1022nw printers, use another printer driver.
Graphics quality
The graphics settings might be unsuitable for your print job. Check the graphic settings, such
as resolution, in the printer properties and adjust them as necessary. See
Printer properties
(driver) for more information.
NOTE
Some resolution might be lost when converting from one graphics format to another.
Return to
Finding the solution.
ENWW Printed page is different than what appeared on screen 71