Filter
Top Products
Reverse this procedure to install the processor.
Speakers
Description Spare part number
Speakers (include cable) 657531-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
Battery on page 36).
5. Remove the hard drive (see
Mass storage device on page 38).
6. Remove the memory module/wireless module compartment cover (see
WLAN module
on page 41).
7. Disconnect the battery charger board ribbon cable from the system board (see
Battery connector
board on page 47).
8. Remove the top cover (see
Top cover on page 49).
9. Disconnect the optical drive cable from the system board (see
Optical drive on page 58).
10.
Remove the system board (see
System board on page 62).
Remove the speakers:
1. Disconnect the speaker cable (1) from the audio/USB board.
2. Remove the four Phillips PM2.0×2.82 screws (2) that secure the speakers to the base enclosure.
Component replacement procedures
69