Filter
Top Products
3.
Remove the speakers (3).
Reverse this procedure to install the speakers.
Display assembly
NOTE: The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, and 2 WLAN antenna cables and transceivers.
Description Spare part number
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only with Beats Edition
computer models
654166-001
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only with standard
computer models
654165-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
Battery on page 36).
5. Remove the memory module/wireless module compartment cover (see
WLAN module
on page 41).
6.
Remove the top cover (see
Top cover on page 49).
70 Chapter 4 Removal and replacement procedures