Filter
Top Products
6-111
Configuring the Switch
Automatic Broadcast Control (ABC) Features
Configuring the Switch
• If you enabled ABC for IP (figure 6-64, below):
Figure 6-71. ABC Enabled With Default IP Option (No VLANs Configured)
i. If you want IP RIP broadcast control, then select the IP RIP Control
parameter and use the Space bar to select Yes.
ii. If your network uses DHCP to manage IP addressing and you
want to automatically configure hosts on the network to be their
own gateways, select Auto Gateway and use the Space bar to select
Ye s . (For more information, refer to “Automatic Gateway Config-
uration” on page 6-115.)
iii. Go to step 6 on page 6-112.
• If you enabled ABC for IPX (figure 6-72, below):