Filter
Top Products
Chapter 3 3-9
Operating the Fibre Bridge
Making Configuration Changes
Operating the
Fibre Bridge
Making Configuration Changes
To make configuration changes, follow these steps:
1. Start your terminal emulation application software.
2. Press the
ENTER key. The following menu will display:
NOTE The user may need to press ENTER several times to prompt the Fibre
Bridge to recognize the serial port settings.
Figure 3-3 Fibre Bridge Configuration, Main Menu
3. Use the
Perform Configuration menu option to make changes to
the configuration. To select the option, type
1 on the keyboard and
press
ENTER to display the Fibre Bridge configuration menu.