Filter
Top Products
6-24
Configuring the Switch
Enhancing Security By Configuring Authorized IP Managers
Configuring the Switch
Figure 6-14. Example of How To Add an Authorized Manager Entry
Figure 6-15. Example of How To Add an Authorized Manager Entry (Continued)
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag-
ers List screen (figure 6-14), highlight the desired entry, and press [E] (for
Edit)
or [D] (for
Delete).
Building IP Masks
The IP Mask parameter controls how the switch uses an Authorized Manager
IP value to recognize the IP addresses of authorized manager stations on your
network.
1. Select Add to add an authorized manager
to the list.
5. Press [Enter], then [S] (for Save) to configure the IP
Authorized Manager entry.
4. Select Manager or Operator access.
3. Use the default mask to allow access by one
management device, or edit the mask to allow
access by a block of management devices. See
“Building IP Masks” below.
2. Enter an Authorized Manager IP address here.