Filter
Top Products
5-2
Using HP TopTools or Other SNMP Tools To Monitor and Manage the Switch
SNMP Management Features
Monitoring and Managing
the Switch
■ Monitoring data normally associated with the SNMP agent (“Get”
operations). Supported Standard MIBs include:
• Bridge MIB (RFC 1493)
dot1dBase, dot1dTp, dot1dStp
• Ethernet MAU MIB (RFC 1515)
dot3IfMauBasicGroup
• Interfaces Evolution MIB (RFC 1573)
ifGeneralGroup, ifRcvAddressGroup, ifStackGroup
• RMON MIB (RFC 1757)
etherstats, events, alarms, and history
• SNMP MIB-II (RFC 1213)
system, interfaces, at, ip, icmp, tcp, udp, snmp
• Entity MIB (RFC 2037)
HP Proprietary MIBs include:
• Statistics for message and packet buffers, tcp, telnet, and timep
(netswtst.mib)
• Port counters, forwarding table, and CPU statistics (stat.mib)
• tftp download (downld.mib)
• Integrated Communications Facility Authentication Manager and
SNMP communities (icf.mib)
• HP ProCurve Switch configuration (config.mib)
• HP VLAN configuration information (vlan.mib) supporting
hpVlanGeneralGroup
• HP Extended RMON MIB version 4 to allow statistical sampling
• HP Entity MIB (entity.mib)
The switch SNMP agent also uses certain variables that are included in a
Hewlett-Packard proprietary MIB file you can add to the SNMP database
in your network management tool. You can copy the MIB file from the HP
TopTools for Hubs & Switches CD shipped with the switch, or from
following World Wide Web site:
http://www.hp.com/go/procurve
For more information, refer to Customer Support/Warranty booklet
included with your switch.