Filter
Top Products
6-122
Configuring the Switch
Configuring and Monitoring Port Security
Configuring the Switch
2. Set the security policy for the selected port.
Figure 6-76. Example of the Default Security Configuration Screen for a Selected
Port
Figure 6-77. Example of Adding Authorized Devices
a. If you want to configure authorized devices:
i. Select Static for the Learn Mode parameter.
ii. Select the number of authorized addresses (devices)
for the Address Limit parameter.
iii. If you want to send SNMP traps notifying of
attempted security violations, select Yes for the
Send Alarm parameter.
b. Select Yes if you
want to prevent
eavesdropping.
c. Click on Apply Changes to enter the above changes and, if Static is selected for
the Learn Mode, to configure specific authorized devices (next screen).
d. Enter the MAC address of an authorized
device for the selected port, then click on
Add. Repeat this step for each authorized
device on the port.
Addresses of devices that have
already been added.