Filter
Top Products
8-17
Troubleshooting
Diagnostics
Troubleshooting
Diagnostics
The switch’s diagnostic tools include the following:
Ping and Link Tests
The Ping test and the Link test are point-to-point tests between your switch
and another IEEE 802.3-compliant device on your network. These tests can
tell you whether the switch is communicating properly with another device.
Note To respond to a Ping test or a Link test, the device you are trying to reach must
be IEEE 802.3-compliant.
Ping Test. This is a test of the path between the switch and another device
on the same or another IP network that can respond to IP packets. (“Ping” is
an acronym for “Packet INternet Groper”.)
Link Test. This is a test of the connection between the switch and a desig-
nated network device on the same LAN (or VLAN, if configured). During the
link test, IEEE 802.3 test packets are sent to the designated network device
in the same VLAN or broadcast domain. The remote device returns the data
to the switch, where it is compared to the data transmitted. If the received
data matches the transmitted data, the test passes.
Feature Switch Console Web Browser
Interface
Page
Link Test Yes Yes 8-17
Ping Test Yes Yes 8-17
Browse
Config File
Yes Yes 8-21
Command
Prompt
Yes No 8-23