Filter
Top Products
6-48
Configuring the Switch
Traffic/Security Filter Features
Configuring the Switch
3. Press the Space bar to select the type of filter you want to configure. The
options are:
• Multicast (the default)
•Protocol
• Source Port
4. Press [v] once to highlight the next line. Depending on the type of filter
you selected in step 3, select one of the options listed in the following
table:
5. Configure the filter action for each destination port. For example:
Figure 6-34. Example of Specifying Filter Actions for Individual Ports
a. Press [v] to highlight the Action option for a destination port
( Dest Port ).
Filter Type Option
Selected in step 3
Next Line for Filter
Type Option
Action for Selected Filter Option
Multicast Multicast Address Type in the multicast address.
Protocol Frame Type Use the Space bar to select the frame type.
Source Port Source Port Use the Space bar to select the source port.
A Drop action has been specified for ports A8 and
B1. Thus, traffic from port A2 will not be forwarded
by ports A8 and B1.
A “Source Port “filter type has been
selected for port A2