Filter
Top Products
6-136
Configuring the Switch
Class of Service (CoS): Managing Bandwidth More Effectively
Configuring the Switch
3. Determine the actual CoS configuration changes you will need to make
on each CoS-capable device in your network in order to implement the
desired policy.
4. Configure the desired CoS priorities on the CoS-capable devices in the
network. For HP devices, HP recommends that you use TopTools for Hubs
& Switches (version N.01.03 or later) to help ensure that your CoS policy
is implemented consistently across the network. Otherwise, use the web
browser interface or the switch console interface for each device to
configure CoS.
Note: If you use TopTools for Hubs & Switches to configure CoS policy
in a network, it overrides any CoS settings configured through the console
or the web browser interface in any individual HP switch.
The remainder of this section describes the general process for using the web
browser interface and the console interface to configure CoS.