Filter
Top Products
5
IMPORTANT SAFETY PRECAUTIONS
Model 2995 has been evaluated by Underwriters Laboratories for conformance
to UL standards 508 and 50 and CSA standard C22.2 No. 14 and bears the UL
Recognized Component mark.
The AC Drive is a power electronic device. For safety reasons, please read
through this operations manual in detail and observe those paragraphs with the
safety alert symbol.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
CAUTION
CAUTION used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result in
property damage.
WARNING
Do not touch printed circuit board (PCB) right after
turning off power. Wait until power light turns off.
Do not attempt to wire circuitry while power is on.
Do not attempt to examine components and signals on
the PCB while the inverter is operating.
Do not attempt to disassemble or modify internal
circuitry, wiring, or components of the inverter.
Inverter must be properly grounded.