Filter
Top Products
4–18 Maintenance and Service Guide
Removal and replacement procedures
Hard drive
✎
The hard drive spare part kit includes a hard drive connector and hard drive bracket.
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the accessory compartment cover (see “WLAN module” on page 4-9).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Disconnect the hard drive connector 1.
3. Grasp the Mylar tab 2 in the hard drive bay, and then lift it up at an angle.
Description Spare part number
500-GB, 5400-rpm for use with HP Pavilion 584512-001
500-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 591372-001
320-GB, 5400-rpm 580020-001
320-GB, 5400-rpm, for use HP Mini and Compaq Mini in systems that include a WWAN module 580020-002
320-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 591371-001
250-GB, 5400-rpm 580019-001
250-GB, 5400-rpm, for use with the HP Mini and Compaq Mini in systems that include a WWAN
module
580019-002
250-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 591370-001
160-GB, 7200-rpm 591250-001
160-GB, 5400-rpm 580018-001
160-GB, 5400-rpm, for use with the HP Mini and Compaq Mini in systems that include a WWAN
module
580018-002
160-GB, 5400-rpm, for use with the HP Pavilion in systems that include a WWAN module 591369-001
80-GB solid state drive (SSD) 584513-001