Filter
Top Products
user’s manual
scan from the transparent materials adapter (TMA)
16
11 A dialog box appears asking if there are more originals to scan. If you
have more negatives to scan, click Yes, and then perform one of the
following steps:
– Select another negative frame within the preview window, make
adjustments, and then click Accept.
OR
– To scan other frames from within the negative strip, remove the negative
strip from the holder and position it so that the frames you want to scan
are in front of the TMA light. Remember that the shiny side must face
you. Close the lid. Then click New Scan, make adjustments, and then
click Accept.
OR
– Place a new negative strip in the TMA and close the lid. In the preview
window, click New Scan, make adjustments, and then click Accept.
12 When you have finished scanning your items, click No when you receive
the prompt for another scan.
The images appear in the HP Photo & Imaging Gallery or other selected
destination.
13 When finished, remove the negative strip. Place the negative strip holder
back into the scanner lid.
Note: You can scan a negative in other ways. For example, in HP Director,
click Scan Picture. Or, if you know you’ll be sharing an item using HP Instant
Share or creating a memories disc using Memories Disc Creator, use one of
these front panel buttons if included on your scanner.