Filter
Top Products
2 Connecting to a Netware 4.11 Server
Windows 95 SR2
6 Remove the 3com cards driver diskette and restart the machine.
7 After windows loads, click on “Start,” to “Settings” and over to “Control
Panel.”
8 Double click on “Network” and select “Add.”
9 Choose to add an adapter, click on “Add” then on “Have Disk.”
10 Insert the 3C509B drivers diskette and set path to “A:\” and hit enter.
(If you have a Hewlett-Packard pre-loaded HDD, set the path statement
to “C:\MASTERS\LANDRV\3C509B\WIN95\”)
11 High light the adapter labeled “3Com Etherlink III ISA (3C509/3C509B) in
ISA Mode” and press “OK.”
12 At the “Network” dialogue box, click on the “Identification” folder.
13 Enter your “Computer Name,” “Workgroup,” and “Computer
Description.”
(If you do not have a Computer name, Workgroup name and Computer
description, contact your network administrator)
14 Approve the “Basic Configuration Resources” by clicking on “OK.”
15 When prompted, set the path to your Windows 95 SR2 files and click on
“OK.”
16 Click on “YES” to complete installation and restart the machine.