Filter
Top Products
5–2 Maintenance and Service Guide
Computer Setup
To exit Computer Setup, use one of the following methods:
■ To exit Computer Setup without saving your changes, click the Exit icon in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the
tab key and the arrow keys to select File > Ignore changes and exit, and then press enter.
– or –
■ To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen, and
then follow the on-screen instructions.
– or –
Use the
tab key and the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press
esc while the “Press the ESC key for Startup Menu” message is
displayed at the bottom of the screen.
2. Press
f10 to enter BIOS Setup.
3. Use a pointing device or the arrow keys to select File > Restore defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the screen, and
then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press
enter.
Your changes go into effect when the computer restarts.
✎
Your password settings, language settings, security settings, and hard drive mode are not changed when you
restore the factory settings.