Filter
Top Products
Computer Setup
Maintenance and Service Guide 5–5
Diagnostics menu
System Configuration menu
✎
Some of the listed System Configuration options may not be supported by your computer.
Select To do this
System Diagnostics Menu ■ System Information—Displays the following information:
❐ Identification information for the computer and
the batteries in the system.
❐ Specification information for the processor, cache and
memory size, system ROM, video revision, and
keyboard controller version.
■ Start-up Test—Verifies the system components needed for
starting the computer.
■ Run-In Test—Runs a comprehensive check on
system memory.
■ Hard Disk Test—Runs a comprehensive self-test on any
hard drive in the system.
Select To do this
Language Change the Computer Setup language.
Boot Options ■ Set a Startup Menu delay (in seconds).
■ Enable/disable Custom Logo (disabled by default).
■ Enable/disable CD-ROM boot (enabled by default).
■ Enable/disable SD Card boot (enabled by default).
■ Enable/disable floppy boot (enabled by default).
■ Enable/disable PXE Internal NIC boot (enabled by default).
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
Device Configurations ■ Enable/disable USB legacy support (enabled by default).
When enabled, USB legacy support allows the following:
❐ Use of a USB keyboard in Computer Setup even when
a Windows operating system is not running.
❐ Startup from bootable USB devices, including
a hard drive, diskette drive, or optical drive connected by
a USB port to the computer.
■ Enable/disable fan always on while connected to an
AC outlet (enabled by default).
■ Enable/disable Data Execution Prevention. When enabled,
the processor can disable some virus code execution,
which helps to improve computer security (enabled
by default).
(Continued)