Filter
Top Products
Power button board
Description Spare part number
Power button board with cable 599517-001
Before removing the power button board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 36).
5. Remove the switch cover (see
Switch cover on page 37).
Remove the power button board:
1. Release the LIF (low insertion force) connector that connects the power button board cable to
the system board (1), and then disconnect the power button board cable (2).
2. Gently pull the power button board away from the double-sided tape that secures the board to
the base enclosure.
3. Remove the power button board (3).
Reverse this procedure to install the power button board.
Component replacement procedures 45