Filter
Top Products
11. Gently release the integrated microphone (1) from the clips at the top of the display back cover,
remove the display cable from the clips and routing channels (2) along the bottom of the display
back cover, and then remove the display cable (3).
12. If it is necessary to remove the wireless antennas and cables:
a. Detach the WLAN antennas (1) from the adhesive on the back cover, and then route the
cables through the clips (2) that secure the antenna cables to the display back cover.
b. Remove the wireless antennas and cables.
Reverse this procedure to reassemble and install the display assembly.
66 Chapter 4 Removal and replacement procedures