Filter
Top Products
c. Flex the inside edge of the left side and the right side of the bezel until it disengages from
the display back cover (3).
d. Remove the display bezel from the display back cover (4).
6. If it is necessary to replace the display hinges, remove the six T8 2.5x5.0 screws (1) that secure
the display hinges to the display panel. Lift the hinges (2) to remove them.
7. If it is necessary to replace the display panel, remove the two T8 2.5x3.0 screws (3) that secure
the top corners of the display panel to the top of the display back cover. Lift the top of the display
panel (4) away from the back cover at an angle.
64 Chapter 4 Removal and replacement procedures