Filter
Top Products
6. Remove the bezel:
a. Flex the top of the bezel until it disengages from the display enclosure (1).
b. Flex the inside bottom of the bezel until it disengages from the display enclosure (2).
c. Flex the outside bottom of the bezel until it disengages from the display enclosure (3).
d. Lift the bottom corners of the bezel until it disengages (4).
e. Lift the bezel at the seam in the hinges until it disengages (5).
f. Remove the bezel from the display enclosure.
The display bezel is available using spare part numbers 536423-001 on computers with 14-in
displays and a webcam and 536422-001 on computers with 14-in displays and no webcam.
7. If it is necessary to replace the webcam module, gently pull the webcam module away from the
double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module
(2). The webcam module can be ordered by using spare part number 535797-001.
NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam
module with the pins on the display enclosure and press onto the double-sided tape.
Component replacement procedures 99