Filter
Top Products
Display assembly
NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description Spare part number
17.3-inch, HD+ BrightView display assembly with camera 535777-001
17.3-inch, HD+ BrightView display assembly 535779-001
17.3-inch, HD+ display assembly with camera 535778-001
17.3-inch, HD+ display assembly 535776-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
5. Remove the following components:
a. Switch cover (see
Switch cover and keyboard on page 42)
b. Keyboard (see
Switch cover and keyboard on page 42)
c. Speakers (see
Speakers on page 49)
d. Palm rest (see
Palm rest on page 50)
Remove the display cable:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer as far as possible.
3. Disconnect the display panel cable (1) from the system board.
4. Disconnect the camera and microphone module cables (2) from the system board, and then
remove the cables from the routing path (3).
Component replacement procedures 59