Filter
Top Products
8. If it is necessary to replace the display hinges, remove the four Phillips PM2.5×5.0 screws (1) that
secure the display panel to the display enclosure.
9. Remove the display panel (2).
10. Remove the four Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display
panel.
NOTE: When removing or replacing the eight Phillips screws, be sure to remove or replace them
in the same sequence as the numbering found on the display hinges (1, 2, 3, 4).
11. Remove the display hinges (2). The left and right display hinges are available in the Bracket Kit,
spare part number 535772-001.
12. If it is necessary to replace the wireless antenna cables, lift the tape (1) that secures the cables to
the display enclosure. The wireless antenna cables are included in the Display Cable Kit, spare
part number 535771-001.
13. Remove the wireless antennas (2).
62 Chapter 4 Removal and replacement procedures