Filter
Top Products
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the system board (1),
(2), and (3) and the heat sink components (4), (5), and (6) and must be replaced each time the heat
sink is removed. Replacement thermal material is included with all heat sink, system board, cable, and
processor spare part kits.
RJ-45 (network) jack
NOTE: The Cable Kit includes replacement thermal material.
Description Spare part number
Cable Kit 535757-001
Before removing the RJ-45 (network) jack, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
5. Remove the following components:
a. Switch cover and keyboard (see
Switch cover and keyboard on page 42)
b. Memory module (see
Memory module on page 45)
c. Optical drive (see
Optical drive on page 47)
d. Speakers (see
Speakers on page 49)
e. Palm rest (see
Palm rest on page 50)
f. WLAN module (see
WLAN module on page 55)
g. Hard drive (see
Hard drive on page 52)
76 Chapter 4 Removal and replacement procedures