Filter
Top Products
HP All-in-One • 3
6
7
8
Connect the power cord
USB cable users: Do not connect
the USB cable until instructed later in this
guide.
See the User Guide if you want to use your
own phone cord or if you have any of these
features:
• DSL
• VoIP/FoIP
• ISDN
• Voice mail
• Distinctive ring
a (1-LINE)
Connect one end of the supplied phone cord
to the phone port (1-LINE) and the other to a
wall jack.
b (2-EXT) Also follow the step below if you
want to connect your phone/answering
machine to the HP All-in-One.
Remove the plug from the (2-EXT) port, and
then plug your phone or answering machine
cord into the port. Additional fax setup
information is in the User Guide.
Connect the phone cord
Press the On button
a After you press the On button, wait for
the print cartridge prompt before continuing.
a
b