Filter
Top Products
HP All-in-One • 9
B1
B2
a Remove the yellow plug from the back of the device.
b Connect one end of the Ethernet cable to the Ethernet port
on the back of the device.
c Connect the other end of the Ethernet cable to the hub/
router/switch. If the cable is not long enough, you can
purchase a longer cable.
IMPORTANT: Do not connect the Ethernet cable to a cable
modem. You must have a working network. If you already
connected the USB cable, do not connect the Ethernet cable.
Connect the Ethernet cable
Choose the correct CD
Windows Users: Mac Users:
a Insert the green HP All-in-One Windows CD. a Insert the gray HP All-in-One Mac CD.
Section B: Ethernet (wired) network