Filter
Top Products
25
HP ProCurve 6600 Switch Fan Tray (J9271A)
See reference in earlier text to HP ProCurve 6600 Switch Fan Tray (J9271A).
Rack mounting options
2-post telco racks
As part of the 6600 series package, each switch ships with rack ears for mounting in 2-post telco racks.
Additional rack mount options and accessories are available detailed subsequently below.
4-post racks: HP ProCurve 6600 Series Rack Mount Kit (J9469A)
For mounting in 4-post server or networking cabinets, the HP ProCurve 6600 Series Rack Mount Kit is required.
The rack kit provides two telescoping rails that span the depth of the cabinet and provide a mounting range
that extends from 26 inches to 36 inches. The rail kit supports square-hole caged nut racks utilizing the EIA
310-d hole size of 3/8 inch x 3/8 inch (.375 in. x .375 in.).
The rail kit also supports round hole racks at 7.2-mm to 7.3-mm diameter. A picture of the 6600 series rail kit is
shown in Figure 13, and the mounting instructions can be found at
www.hp.com/rnd/support/manuals/6600dc.htm.
6600 rail kit contents
Left rail x 1
Right rail x 1
Hardware kit
Screw x 4
Stud x 4
Zip tie x 2
Rack bracket x 2 (5003-1452)
Figure 13: HP ProCurve 6600 Rack Mount Kit (J9469A)
HP 10000 series server racks: HP 10000 Series Rack Mount Kit (5070-0145) for
6600 series
While the HP ProCurve 6600 Series Rack Mount Kit works with HP 10000 series racks, some customers
prefer to order preconfigured server and networking solutions that are rack shipped directly from HP. For these
types of orders, the 10000 series rack mount kit—orderable via the HP part store (www.partsurfer.hp.com)—
is required. The 10000 series rack mount kit provides two fixed rails that span the depth of the cabinet. A
picture of the 10000 series rail kit is shown in Figure 14, and the mounting instructions can be found at
www.hp.com/rnd/support/manuals/6600dc.htm.
10000 series rack kit contents
10000 series rails x 2
M6 screw x 12
M6 cage nut x 12
Captive washer for M6 x 12
x 4 to attach rail to rack
x 2 to attach bracket to rack
M4x0.7 8-mm FH screw x 4
Rack bracket x 2 (5003-1452)
Hold-down brackets x 2
Figure 14: HP 10000 Series Rack Mount Kit (5070-0145) for 6600 series