Filter
Top Products
3. Remove the audio/ExpressCard assembly (3) by sliding it up and to the right.
Reverse this procedure to install the audio/ExpressCard assembly.
Modem module cable
NOTE: The modem module spare part kits do not include a modem module cable. The modem module
cable is included in the Cable Kit, spare part number 487432-001. The modem module cable includes
an RJ-11 connector.
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
Battery on page 44).
5. Remove the following:
a. Hard drive (see
Hard drive on page 50)
b. Keyboard (see
Keyboard on page 58)
c. Switch cover (see
Switch cover on page 67)
d. Display assembly (see
Display assembly on page 78)
e. Top cover (see
Top cover on page 83)
Remove the modem module cable:
1. Disconnect the modem module cable (1) from the system board.
Component replacement procedures 91