Filter
Top Products
Speaker
Description Spare part number
Speaker 486308-001
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
Battery on page 44).
5. Remove the following:
a. Hard drive (see
Hard drive on page 50)
b. Keyboard (see
Keyboard on page 58)
c. Switch cover (see
Switch cover on page 67)
d. Display assembly (see
Display assembly on page 78)
e. Top cover (see
Top cover on page 83)
f. Bluetooth module cable (see
Bluetooth module cable on page 88)
Remove the speaker:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the Torx8 T8M2.5×7.0 screw (2) that secures the speaker to the base enclosure.
3. Remove the speaker (3) by lifting it straight up.
Component replacement procedures 89