Filter
Top Products
12. If it is necessary to replace the display bezel or display hinges, remove the four rubber screw covers
(1) and the four Phillips PM2.5×7.0 screws (2) that secure the display bezel to the display assembly.
The rubber screw covers are available in the Rubber Kit, spare part number 482966-001.
NOTE: See Display inverter on page 46 for procedures on removing the display inverter.
13. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
14. Remove the display bezel (3). The display bezel is available using spare part numbers 488189-001
(for use with computer models equipped with a webcam) and 488190-001 (for use with computer
models not equipped with a webcam).
15. If it is necessary to replace the display hinges, remove the two Phillips PM2.5×7.0 screws (1) that
secure the display hinges to the display enclosure.
Component replacement procedures 81