Filter
Top Products
14 Remove the packing tape from tray 4.
15 Open the media transfer door and
remove the orange packing spacers.
16 Firmly grip the handle in the center of
tray 4, squeeze the release lever, and
pull the tray out until it stops.
17 Remove the two orange packing clips
from inside tray 4 by squeezing the
sides of the clips and pulling them out.
Caution
Leaving the orange clips in tray 4 can
damage the tray.
18 Close all doors and input trays.
19 Remove the protective film from the
printer control panel display.
By completing steps 1 through 19 above,
all tape and spacers should be removed
and unpacking of the printer should be
complete.
8 Step 2: Unpacking the Printer EN