Filter
Top Products
14
EN
Step 4: Connecting the Printer to the Network
If you will connect the computer to the
printer with a parallel cable, see “To
connect a parallel cable” later in this
Step.
If the printer was shipped with an
optional HP JetDirect 10/100TX internal
print server for 10Base-T or 100Base-TX
networks, the RJ-45 (unshielded twisted
pair) card is installed.
To connect to a 10Base-T or 100Base-TX network
Plug the connector of the unshielded twisted-pair network cable into
the RJ-45 port. The other end of the cable should be attached to the
network.
Note
The RJ-45 cable is not included with the printer. It must be purchased
separately.