Filter
Top Products
36
EN
3
Reinstall the print server.
4
Verify that the configuration of the connecting network device
(such as a 10/100TX network switch) matches. For example, to
set the print server for 100TX Full-duplex operation, the port on
the network switch must also be set for 100TX Full-duplex
operation.
5
Turn the printer off and back on and check the print server
operation. If the print server fails to link, contact a local authorized
HP dealer or service representative.
Print Server Operation Jumper P1 Jumper P2 Jumper P3
Autonegotiation
Enabled
AUTO ——
100 Half-duplex (not AUTO) 100 H
100 Full-duplex (not AUTO) 100 (not H)
10 Half-duplex (not AUTO) (not 100) H
10 Full-duplex (not AUTO) (not 100) (not H)