Filter
Top Products
16 Product Setup ENWW
Step 6. Position the product
1 Unlock the front wheels of the product (if they are locked), and roll
the product to its permanent location. Leave space to walk behind
the product and to install the output device.
2 Push the locking tabs on the front wheels to the lock position. Only
the front wheels lock.
3 If the ADF output bin is installed, remove it.
4 Make sure that the scanner shipping lock is unlocked (moved to the
right). The shipping lock is located on the left side of the scanner.
5 Attach the ADF output bin.
Note
You must position the product before you install the output device. See
Step 8. Install output device.
1
2
4
5