Filter
Top Products
ENWW Change the control panel overlays 19
English
Step 9. Change the control panel overlays
The control panel comes either with English overlays installed or with no
overlays. If necessary, use the following procedure to change the control
panel overlays.
1 Locate the two control panel overlays.
2 Lift the top cover of the product.
3 Insert a small, flat-blade screwdriver or other thin, narrow device in
the slot at the top edge of one of the overlays.
4 Lift the overlay up and backward to move it away from the product.
5 Position the new overlay over the control panel. Align the ends of
the overlay with the holes on the control panel and slide the overlay
in.
6 Snap the overlay firmly onto the control panel. Ensure that the
overlay is flat against the control panel.
7 Repeat steps 3 through 6 to change the second overlay.
8 Close the top cover.
4
1
3
5
6