Filter
Top Products
32 Product Setup ENWW
Step 17. Verify product setup
To verify that the product has been set up correctly to copy, send, and print, use the following
steps.
To verify copying
1 Load a document face-down onto the ADF and adjust the paper guides. The product
automatically detects that paper has been loaded into the ADF.
2 Press
START.
If the document does not copy correctly, check your product installation. For additional
information, see the use guide.
To verify e-mail
1 Place a one-page document face-down on the glass.
2 Touch E-mail.
3 Touch From: and then type your name by using the touch-screen keyboard.
Note Touch to delete any incorrect keystrokes.
4 Touch OK.
5 Touch To: and then type your own e-mail address.
6 Touch OK.
7 Press S
TART.
The product sends the document to you as an e-mail attachment.
If the document does not send correctly, check your product installation and configuration.
For additional information, see the use guide.
To verify printing
1 Open a program of your choice. Open or create a simple document.
2 In the program, select the Print command.
3 Select the HP LaserJet 9040mfp or HP LaserJet 9050mfp as your product.
4 Print the document.
If the document does not print correctly, check your product installation and configuration. For
additional information, see the use guide.
Customer support
For additional information regarding the product, see the use guide on the CD-ROM. For
HP Customer Care information, see the support flyer that came with the product.