Filter
Top Products
Figure 43 Patches are not loaded to the memory patch area
Patch 1 IDLE
Patch 2 IDLE
Patch 3 IDLE
Patch 4 IDLE
Patch 5 IDLE
Patch 6 IDLE
Patch 7 IDLE
Patch 8 IDLE
Memory patch area
NOTE:
The memory patch area supports up to 200 patches.
DEACTIVE state
Patches in the DEACTIVE state have been loaded to the memory patch area but have not run in the system
yet. Suppose that the patch file to be loaded has seven patches. After the seven patches successfully pass
the version check and CRC check, they are loaded to the memory patch area and are in the DEACTIVE
state. At this time, the patch states in the system are as shown in Figure 44.
Figure 44 A patch file is loaded to the memory patch area
ACTIVE state
Patches in the ACTIVE state are those that have run temporarily in the system and become DEACTIVE after
system reboot. For the seven patches in Figure 44, if you activate the first five patches, their states change
from DEACTIVE to ACTIVE. At this time, the patch states in the system are as shown in Figure 45.
The patches that are in the ACTIVE state are in the DEACTIVE state after system reboot.
119