![](http://pdfasset.owneriq.net/d/2f/d2fd389b-13c6-4d8d-b8aa-b34585b5bf5c/d2fd389b-13c6-4d8d-b8aa-b34585b5bf5c-bg5d.png)
d.
Top cover (see
Top cover on page 65)
e. Fan (see
Fan on page 73)
Remove the speakers:
1. Remove the three Phillips PM2.0×2.0 broad head screws (1) that secure the speakers to the
base enclosure.
2. Remove the speakers (2) from the base enclosure.
NOTE: The speakers includes four rubber isolators (3). These isolators are crucial to the
performance of the speakers.
Reverse this procedure to install the speakers.
Component replacement procedures
85